Mitsubishi L200 Owner's Manual page 108

NOTE
l The "Completed the calibration". message
may be displayed even if you terminate the
turn before it is complete and return to the ve-
hicle's original direction. The compass may
not be properly calibrated in this case, so you
must turn the vehicle through at least
360 degrees.
4. The compass setting will finish automatical-
ly and the words "COMPASS CALIBRA-
TION COMPLETE" will appear on the
screen.
Changing the calendar setting
E00519500036
The date and the calendar indication patterns can
be changed.
Date setting
1. Press the "ADJ" button to select the calendar
setting display.
2. Press the "←" or "→" function button to se-
lect "CALENDAR ADJUST". Then press
the "SELECT" function button.
3. Use the function buttons to set the calendar.
OCRE12E1
Instruments and controls
"→"- Select "YEAR", "MONTH", "DAY"
you wish to change.
"YEAR", "MONTH", and "DAY" are
changed over by turns every time you
lightly press the "→" function button.
"+"- Change "YEAR", "MONTH", "DAY"
you have selected.
The indication is changed to your de-
sired date every time you lightly press
the "+" function button.
If you continue pressing the button for
about 2 seconds or more, the indication
is forwarded.
"SET"- Determine the date.
Press the "SET" function button. Then
the display flashes twice and the setting
is changed.
NOTE
l The year changes in the following sequence:
2009 → 2010 → ... 2099 → 2009.
l You can return to the previous display by
pressing the "BACK" function button.
3
3-23