Mitsubishi L200 Owner's Manual page 240

8. The voice guide will say "Please say the
name of the device after the beep." You can
assign a desired name for the Bluetooth
vice and register it as a device tag. Say the
name you want to register after the beep.
NOTE
l When the confirmation function is on, after
repeating the device tag you have said, the
voice guide will ask "Is this correct?" An-
swer "Yes."
To change the device tag, answer "No" and
then say the device tag again.
9. The voice guide will say "Pairing complete,"
after which a beep will be played and the pair-
ing process will end.
Selecting a device
E00760700016
®
If multiple paired Bluetooth devices are available
in the vehicle, the cellular phone or music player
most recently connected is automatically connected
®
to the Bluetooth 2.0 interface.
You can connect to the other cellular phone or mu-
sic player by following setting change procedures.
To select a cellular phone
1. Press the SPEECH button.
2. Say "Setup".
3. Say "Select phone."
4. After the voice guide says "Please say," the
numbers of the cellular phones and device
tags of corresponding cellular phones will be
read out in order, starting with the cellular
phone that has been most recently connected.
Say the number of the cellular phone that
you want to connect to.
When the confirmation function is on, the sys-
tem will ask you again whether the phone
® that you want to connect to is correct. An-
de-
swer "Yes" to continue and connect to the cel-
lular phone.
Answer "No," and the voice guide will say
"Please say." Say the number of the phone
that you want to connect to.
NOTE
l You can connect to a phone at any time by
pressing the SPEECH button and saying the
number, even before all of the paired num-
bers and device tags of corresponding cellu-
lar phones are read out by the system.
5. The selected phone will be connected to the
®
Bluetooth 2.0 interface. The voice guide
will say "<device tag> selected" and then the
system will return to the main menu.
To select a music player
1. Press the SPEECH button.
2. Say "Setup".
3. Say "Select music player."
4. After the voice guide says "Please say," the
numbers of the music players and device tags
of corresponding music players will be read
out in order, starting with the music player
that has been most recently connected.
Say the number of the music player that you
want to connect to.
When the confirmation function is on, the sys-
tem will ask you again whether the music
player that you want to connect to is correct.
Answer "Yes" to continue and connect to the
music player.
OCRE12E1
For pleasant driving
Answer "No," and the voice guide will say
"Please say." Say the number of the music
player that you want to connect to.
NOTE
l You can connect to a music player at any
time by pressing the SPEECH button and say-
ing the number, even before all of the paired
numbers and device tags of corresponding mu-
sic players are read out by the system.
5. The selected music player will be connected
®
to the Bluetooth 2.0 interface.
The voice guide will say "<device tag> selec-
ted" and then the system will return to the
main menu.
Deleting a device
Use the following procedure to delete a paired Blue-
® ®
tooth device from the Bluetooth 2.0 interface.
1. Press the SPEECH button.
2. Say "Setup".
3. Say "Pairing options."
4. The voice guide will say "Select one of the
following: pair, edit, delete, or list." Say "De-
lete."
5. After the voice guide says "Please say," the
numbers of the devices and device tags of cor-
responding devices will be read out in order,
starting with the device that has been most re-
cently connected. After it completes reading
all pairs, the voice guide will say "or all."
Say the number of the device that you want
to delete from the system.
If you want to delete all paired phones from
the system, say "All."
5
5-57