Mitsubishi L200 Owner's Manual page 69

Seat and seat belts
Child restraint anchorage points (Dou-
ble cab)*
Anchorage locations
There are 2 child restraint anchorage points on the
floor, located behind the rear seat. These are for se-
curing a child restraint system tether strap to each
of the 2 rear seating positions in your vehicle.
2
*: Rear of the vehicle
CAUTION
l The anchorages are only applicable for
child restraints fitted in the rear seat.
2-24
Tether anchorage strap installation
E00406900354
WARNING
l Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used for
adult seat belts, harnesses, or for attach-
ing other items or equipment to the vehicle.
1. Remove the head restraint from the location
in which you wish to install a child restraint.
2. Drop the child restraint's tether strap (A)
down the back of the rear seatback.
OCRE12E1
3. Tip the armrest forward. Open the fastener
(B) that is located in the space where the arm-
rest was stowed.
4. Put your hand in the opening of the fastener,
attach the tether strap's hook (C) to the tether
anchorage (D), and securely tighten the teth-
er strap.