Mitsubishi L200 Owner's Manual page 107

Instruments and controls
3. When the declination adjustment has been
completed, press the "SET" function button.
3
Setting the compass
The compass is usually calibrated automatically
when the vehicle is moving. At times when com-
plete calibration is not possible, no compass indica-
tions are given. Manually set the compass using the
following procedure.
3-22
NOTE
l
If your vehicle has a sunroof, keep the sun-
roof closed when calibrating the compass.
Having the sunroof open when calibrating
the compass could render the compass un-
able to correctly show directions.
With a settings display showing, press the "ADJ"
button and select "COMPASS CALIBRATION".
1. Press the function button for "SELECT".
2. Press the function button for "SELECT".
OCRE12E1
3. Turn the vehicle slowly through 360 degrees
in a safe, open area with no buildings and oth-
er vehicles.
NOTE
l If you wish to stop calibrating the compass
part-way through the procedure, press the "IN-
FO" button or "ADJ" button.