Mitsubishi L200 Owner's Manual page 221

For pleasant driving
To listen to tracks from a device con-
®
nected via Bluetooth
1. Press the PWR button (1) to turn on the au-
dio system. The system turns on in the last
mode used.
2. Press the CD button (8) several times to
switch to the BT-A (Bluetooth
mode changes as follows every time the CD
button is pressed.
CD mode → USB (iPod) mode → Blue-
®
tooth mode
NOTE
l For vehicles equipped with Auxiliary Audio
connector (RCA), pressing and holding the
CD button for 2 seconds or more switches
the system to the AUX mode.
3. Connect your Bluetooth
®
device.
Refer to "Connecting the Bluetooth® 2.0 in-
5
terface and Bluetooth® device" on page
5-55.
4. Playback starts automatically.
NOTE
l Depending on the connected device, the play-
back may not start automatically.
In this case, operate the connected device to
start the playback.
To stop the playback (if supported by the device)
To stop the playback, press and hold the
(9) until you hear a beep.
To restart the playback, press the
5-38
To pause the playback (if supported by the device)
To pause the playback, press the
E00762700225
To restart the playback, press the
To fast-forward/reverse the track (if supported by
the device)
®
) mode. The
Fast-forward
To fast-forward the current track, press the
ton (6). While the button is pressed, the track will
be fast-forwarded.
Fast-reverse
To fast-reverse the current track, press the
ton (7). While the button is pressed, the track will
be fast-reversed.
To select a track (if supported by the device)
Track up
Press the button (6) repeatedly until the desired
track number appears on the display.
Track down
Press the button (7) repeatedly until the desired
track number appears on the display.
NOTE
l
Pressing the button (7) once during the
song will cause the audio system to restart
playback from the beginning of the song.
E00762800079 To play the same track or all tracks repeatedly (if
button
supported by the device)
Press the RPT button (4) several times to show
button (10).
"1-RPT" (same track repeat mode) or "A-RPT" (all
tracks repeat mode) in the display.
OCRE12E1
The mode changes as follows every time the RPT
button is pressed.
E00762900083
button (9).
1-RPT mode → A-RPT mode → mode off
button (10).
To exit these mode, press the RPT button several
times until the 1-RPT indicator or the A-RPT indi-
cator goes off.
E00765600010
To play tracks in random order (if supported by
the device)
but-
Press the RDM button (5) to show "RDM" in the
display.
The system randomly selects and plays tracks from
all tracks in the Bluetooth
but-
To exit this mode, press the button again.
To switch the display (if supported by the device)
The display changes as follows every time the
E00763000094
TEXT button (2) is pressed briefly.
Album title → Title name → Artist name → Genre
→ Normal display
Example
Album title
E00763100079
E00763200070
®
device.
E00763400072