Mitsubishi L200 Owner's Manual page 70

Installing a child restraint system to
the lower anchorage (ISOFIX child re-
straint mountings)*
E00408900114
Your vehicle's second seat is fitted with lower an-
chorages for attaching a child restraint system with
ISOFIX mountings.
Child restraint system with ISOFIX
mountings
E00409000369
The child restraint system is designed only for
seats that incorporate lower anchorages. Retain the
child restraint system using the lower anchorages.
It is not necessary to retain the child restraint sys-
tem using the vehicle's seat belts.
A- Child restraint system connectors
To install
WARNING
l If there is any foreign material in or
around the connectors, remove it before
installing the child restraint system. Also,
make sure the seat belt is away from, not
looped through or otherwise interfering
with, the child restraint system. If foreign
matter is not removed and/or the seat
belt interferes with the child restraint sys-
tem, the child restraint system will not be
secured properly and could move for-
ward in the event of sudden braking or a
collision, seriously injuring the child and
possibly other vehicle occupants.
l When the vehicle is moving do not adjust
the seat where the child restraint system
is installed.
OCRE12E1
Seat and seat belts
1. Push the child restraint system's connectors
into the lower anchorages (A) in accordance
with the instructions provided by the child re-
straint system's manufacturer.
If your child restraint system requires the use
of a tether strap, fasten the tether strap in ac-
cordance with the following procedures.
2. Remove the head restraint from the location
in which you wish to install a child restraint.
3. Drop the child restraint's tether strap (B)
down the back of the rear seatback.
2-25
2