Mitsubishi L200 Owner's Manual page 325

Maintenance
2. To install the bulb, perform the removal
steps in reverse.
Side turn-signal lamps
1. To remove a side turn-signal lamp, insert a
straight blade (or minus) screwdriver at the
end of the lamp nearer the front of the body
and use it to gently lever the lamp out of the
body.
Front
NOTE
l Wrap a piece of cloth around the tip of the
screwdriver in order to avoid scratching the
lens and the body.
8
8-28
2. Remove the socket and bulb assembly togeth-
er by turning it anticlockwise, and then re-
move the bulb by pulling out.
E01003900037
3. To install the bulb, perform the removal
steps in reverse.
NOTE
l
When replacing the lamp assembly, push in
the end facing the rear of the vehicle first.
Front
OCRE12E1
Front fog lamps*
E01004001537
1. Insert a straight blade (or minus) screwdriver
with a cloth over its tip at the edge of the cov-
er and pry gently to remove the cover.
Type 1
Type 2