Mitsubishi L200 Owner's Manual page 194

NOTE
l
Set the temperature at about 22 (Type 1) or
25 (Type 2) under normal conditions.
l
When the temperature is set to the highest or
the lowest setting under the AUTO opera-
tion, the air selection, mode selection, blower
speed and the air conditioning will be auto-
matically changed as follows.
Also, if manually operated after an automatic
changeover, manual operation will be selec-
ted.
• Quick Heating (When the temperature is
set to the highest setting)
Outside air will be introduced, the air
flow will select foot position, and the air
conditioning will stop.
• Quick Cooling (When the temperature is
set to the lowest setting)
Inside air will be recirculated, the air
flow will select face position, and the air
conditioning will operate.
Operating the system in manual mode
E00704200040
Blower speed and ventilator mode may be control-
led manually by setting the blower speed selection
dial and the mode selection dial to the desired posi-
tions. To return to automatic operation, set the dials
to the "AUTO" position.
Demisting of the windscreen and door windows
E00704300689
CAUTION
l For safety, make sure you have a clear
view through all the windows.
To remove frost or mist from the windscreen and
door windows, use the mode selection dial ("
or " ").
For ordinary demisting
Use this setting to keep the windscreen and door
windows clear of mist, and to keep the leg area heat-
ed (when driving in rain or snow).
1. Set the air selection switch (A) to the outside
position.
2. Set the mode selection dial to the "
tion.
3. Select your desired blower speed by turning
the blower speed selection dial.
4. Select your desired temperature by turning
the temperature control dial.
5. Push the air conditioning switch (B).
OCRE12E1
For pleasant driving
For quick demisting
"
1. Set the mode selection dial to the "
tion.
2. Set the blower to the maximum speed.
3. Set the temperature to the highest position.
NOTE
l While the mode selection dial is set to the
" " position, the air conditioning will oper-
ate automatically and the outside air position
" posi-
will also be selected automatically.
l
To demist effectively, direct the air flow
from the side ventilators towards the door win-
dows.
l Do not set the temperature control dial to the
max. cool position. Cool air will blow
against the window glasses and form mist on
them.
" posi-
5
5-11