Mitsubishi L200 Owner's Manual page 189

For pleasant driving
Cooling (vehicles with air conditioning)
LHD
RHD
5
1. Set the mode selection dial to the "
tion.
2. Set the air selection lever to the "
side) position.
3. Push the air conditioning switch (B).
4. Change the temperature by turning the con-
trol dial clockwise or anticlockwise.
5. Select the desired blower speed.
5-06
CAUTION
E00701900424
l
If the outside air is dusty or otherwise con-
taminated, or if high cooling performance
is desired, set air selection lever to the
" " (recirculation) position and the tem-
perature control dial all the way to the left.
Set to the " " (outside) position period-
ically to increase ventilation so that the
windows do not become fogged up.
Combination of unheated air and heated air
Select the mode selection dial to the position
shown in the illustration and set the air selection lev-
er to the " " (outside) position.
The air flow will be directed to the leg area and the
upper part of the passenger compartment. Select
the desired blower speed.
LHD
" posi-
" (out-
OCRE12E1
RHD
Warm air flows to the leg area and unheated or
E00702000451
slightly warm air (depending upon temperature set-
ting) flows to the upper part of the passenger com-
partment.
Demisting of the windscreen and door windows
CAUTION
l For safety, make sure you have a clear
view through all the windows.
To remove frost or mist from the windscreen and
door windows, use the mode selection dial ("
or " ").
E00702100579
"