Disabling Lldp On The Switch - Allied Telesis T-8100L/8 User Manual

Disabling LLDP on the Switch

To disable the LLDP feature on a switch, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 122 on
page 284.
2. From the Discovery & Monitoring tab, hover over LLDP.
The LLDP tab appears to the right.
3. From the LLDP tab, move the cursor to the right and select Basic
Configuration from the drop-down menu.
The LLDP Configuration page is displayed. See Figure 123 on page
285.
4. Use the pull-down menu next to the Status field to select "Disabled."
5. Click Apply.
6. Click SAVE to save your changes to the startup configuration file.
AT-8100 Series Version 2.2.5.0 Web Interface User's Guide
287