Displaying And Modifying Igmp Snooping Configuration; Figure 56: Switching Igmp Tab - Allied Telesis T-8100L/8 User Manual

Displaying and Modifying IGMP Snooping Configuration

To display and modify the IGMP Configuration settings, do the following:
1. Hover the cursor over the Switching tab.
The Switching Tab is displayed. See Figure 56.
Figure 56. Switching IGMP Tab
2. Hover over IGMP and then move the cursor to the right to select IGMP
Snooping.
The IGMP Snooping Configuration page is displayed. See Figure 57
on page 152.
AT-8100 Series Version 2.2.5.0 Web Interface User's Guide
151