Figure 125: Modify Lldp Port Configuration Page - Allied Telesis T-8100L/8 User Manual

Figure 125. Modify LLDP Port Configuration Page
4. Change the settings as needed:
Interface— Indicates the port ID.

Notifications— Check the checkbox to activate the switch to send

LLDP-MED topology change notifications when a device is
connected to, or disconnected from, the port. By default, this field is
not selected.
Advertisement Transmit— Check the checkbox to activate the

port to send LLDP advertisements. A port configured to transmit
LLDP advertisements sends the mandatory TLVs and any optional
LLDP TLVs they have been specified to send. By default, this field
is selected.
Advertisement Receive— Check the checkbox to activate the

port to accept LLDP advertisements. A port configured to receive
LLDP advertisements accepts all advertisements from their
neighbors. By default, this field is selected.
Med Notifications— Check the checkbox to activate the switch to

send LLDP-MED topology change notifications when a device is
connected to, or disconnected from, the port. By default, this field is
not selected.
5. Click Apply.
6. Click SAVE to save your changes to the startup configuration file.
AT-8100 Series Version 2.2.5.0 Web Interface User's Guide
289