Adding A Vlan; Figure 52: Add Vlan Page - Allied Telesis T-8100L/8 User Manual

Adding a VLAN

To create a VLAN, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 24 on page 65.
2. From the Switching tab drop-down menu, select VLANs.
The VLANs page is displayed. See Figure 51 on page 134.
3. From the VLANs page, click Add.
The Add VLAN page is displayed. See Figure 52.
4. Enter the following settings as needed:
VLAN ID— Assign a VLAN identifier. The range is 2 to 4094. The

VID 1 is reserved for the Default_VLAN. The VID cannot be the
same as the VID of an existing VLAN on the switch.
If this VLAN is unique in your network, its VID must also be unique.
However, if this VLAN is part of a larger VLAN that spans multiple
switches, the VID value for the VLAN must be the same on each
AT-8100 Series Version 2.2.5.0 Web Interface User's Guide
Figure 52. Add VLAN Page
135