Modifying The Static Trunk Settings; Figure 50: Modify Static Trunk Page - Allied Telesis T-8100L/8 User Manual

Modifying the Static Trunk Settings

Review the following information if you are adding ports to an existing
trunk:
The ports of a static trunk must be members of the same VLAN.

If the new port added to a trunk is already a member of another static

trunk, you must first remove it from its current trunk assignment.
To add or remove member ports from a static port trunk, or modify the load
balance method, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 24 on page 65.
2. From the Switching tab, hover over Link Aggregation.
For an example of the Link Aggregation selection, see Figure 47 on
page 123.
3. Move the cursor to the right and select Static Trunks.
The Static Trunks page is displayed. See Figure 48 on page 123.
4. From the Static Trunks page, click Edit.
The Modify Static Trunk page is displayed. See Figure 50.
Figure 50. Modify Static Trunk Page
AT-8100 Series Version 2.2.5.0 Web Interface User's Guide
127