Chapter 25: LLDP and LLDP-MED
Selecting LLDP TLVs on a Port
290
To enable LLDP TLV, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 122 on
page 284.
2. From the Discovery & Monitoring tab, hover over LLDP.
The LLDP tab is displayed.
3. From the LLDP tab, hover over TLV.
The LLDP TLV tab is displayed in Figure 126.
4. Move your cursor to the right and select TLV again.
The LLDP TLV page is displayed. See Figure 127 on page 291.
Figure 126. LLDP TLV Tab