Displaying Igmp Snooping - Allied Telesis AT-9000 Series User Manual

Displaying IGMP Snooping

IGMP Snooping Configuration:
IGMP Snooping Status ............... Enabled
Host Topology ...................... Single-Host/Port
Host/Router Timeout Interval ....... 255 seconds
Maximum IGMP Multicast Groups ...... 64
Router Port(s) ..................... Auto Detect
Router List:
VLAN ID
----------------------------------------------------
1
Host List:
Number of IGMP Multicast Groups: 2
MulticastGroup
------------------------------------------------------------
0100.5e7f.ffff
0100.5e7f.ffff
0100.5e64.3201
To display the settings of IGMP Snooping and its status, use the SHOW IP
IGMP SNOOPING command in the User Exec mode or Privileged Exec
mode:
awplus# show ip igmp snooping
Here is an example of the information the command displays:
Port/Trunk ID RouterIP
port1.0.31 10.0.0.254
VLAN ID Port/TrunkID HostIP
1 port1.0.1
1 port1.0.30
1 port1.0.15
Figure 94. SHOW IP IGMP SNOOPING
The information in the window is described in Table 43 on page 489.
AT-9000 Switch Command Line User's Guide
Exp. Time
110
IGMP Ver Exp.Time
192.169.20.50 v3
172.16.20.222 v2
10.10.5.01 v1
200
45
161
475