Igmp Snooping; Igmp Snooping Configuration - Allied Telesis AT-FS750 User Manual

Server ID
IP Address
Shared Secret
Server Type
Response Time (secs)
Retry Count
Click Add to add a new RADIUS server, Reset to clear the value just inputed.
Parameter
Select
Server ID
IP Address
Shared Secret
Server Type
Response Time (secs)
Retry Count
Click Apply to submit the changes the setting of an existing RADIUS server, Delete to delete one.

IGMP Snooping

IGMP Snooping Configuration

This page is to configure the IGMP Snooping global settings.
Parameter
System Control
Click Start to start or shutdown the IGMP Snooing globally.
6-22
Specify the new RADIUS server ID. The possible ID is 1-10.
Specify the IP address of the new RADIUS server.
Specify the encryption key between RADIUS server and clients.
Specify the server type of the RADIUS server. The options are:
Authenticating – This server is only for RADIUS authentication.
Accounting - This server is only for RADIUS accounting.
Both - This RADIUS server support both authentication and accounting.
Specify the time period that a client waits for the response from the RADIUS
server before re-sending the request. The possible number is 1-120 seconds.
The maximum number that a client re-sends the request when there is no
response from RADIUS server. The possible number is 1-254 times.
Description
The RADIUS server ID.
Specify the IP address of the RADIUS server.
Specify the encryption key between RADIUS server and clients.
Specify the server type of the RADIUS server. The options are:
Authenticating – This server is only for RADIUS authentication.
Accounting - This server is only for RADIUS accounting.
Both - This RADIUS server support both authentication and accounting.
Specify the time period that a client waits for the response from the RADIUS
server before re-sending the request. The possible number is 1-120 seconds.
The maximum number that a client re-sends the request when there is no
response from RADIUS server. The possible number is 1-254 times.
Figure 59 – Layer2 Management > IGMP Snooping > Basic Settings
Description
To activate or shutdown IGMP snooping of the Switch. Select Start to activate
the function, Shutdown to shutdown it. Default is Start.
AT-FS750/24-41 Web User Interface Manual