Nat Hairpin In C/S Mode Configuration Example - HP FlexNetwork MSR2003 Configuration Manual

Flexnetwork msr router series

Hide thumbs Also See for FlexNetwork MSR2003:

Table of Contents

# Display NAT session information generated when Host accesses the Web server.

[Router] display nat session verbose

Destination IP/port: 202.38.1.2/8080

DS-Lite tunnel peer: -

VPN instance/VLAN ID/VLL ID: -/-/-

Protocol: TCP(6)

Inbound interface: GigabitEthernet2/0/2

Destination IP/port: 202.38.1.3/1025

DS-Lite tunnel peer: -

VPN instance/VLAN ID/VLL ID: -/-/-

Protocol: TCP(6)

Inbound interface: GigabitEthernet2/0/1

State: TCP_ESTABLISHED

Application: HTTP

Start time: 2012-08-15 14:53:29

Initiator->Responder:

Responder->Initiator:

Total sessions found: 1

NAT hairpin in C/S mode configuration example

Network requirements

external users. The private network uses two public IP addresses 202.38.1.1 and 202.38.1.2.

Configure NAT hairpin in C/S mode to allow external and internal users to access the internal FTP

server by using public IP address 202.38.1.2.

IP/port: 192.168.1.2/1694

IP/port: 192.168.1.2/8080

69, the internal FTP server at 192.168.1.4/24 provides services for internal and

Show Quick Links

Table of Contents