Configuration Procedure; Verifying The Configuration - HP FlexNetwork MSR2003 Configuration Manual

Flexnetwork msr router series

Hide thumbs Also See for FlexNetwork MSR2003:

Table of Contents

Configuration procedure

# Enable DHCPv6 snooping.

<RouterB> system-view

[RouterB] ipv6 dhcp snooping enable

# Specify GigabitEthernet 2/0/1 as a trusted port.

[RouterB] interface gigabitethernet 2/0/1

[RouterB-GigabitEthernet2/0/1] ipv6 dhcp snooping trust

[RouterB-GigabitEthernet2/0/1] quit

# Enable recording of client information in DHCPv6 snooping entries.

[RouterB]interface gigabitethernet 2/0/2

[RouterB-GigabitEthernet2/0/2] ipv6 dhcp snooping binding record

[RouterB-GigabitEthernet2/0/2] quit

# Verify that the DHCPv6 client obtains an IPv6 address and all other configuration parameters only

from the authorized DHCPv6 server. (Details not shown.)

# Display DHCPv6 snooping entries on the DHCPv6 snooping device.

[RouterB] display ipv6 dhcp snooping binding

Show Quick Links

Table of Contents