Configuring Network Parameters Assignment; Configuring Network Parameters In A Dhcpv6 Address Pool - HP FlexNetwork MSR2003 Configuration Manual

Step
6. (Optional.) Specify a
temporary IPv6 address
range.
7. (Optional.) Create a static
binding.

Configuring network parameters assignment

In addition to IPv6 prefixes and IPv6 addresses, you can configure up to eight DNS server addresses,
one domain name suffix, eight SIP server addresses, and eight SIP server domain names in an
address pool.
You can configure network parameters on a DHCPv6 server by using one of the following methods:
•
Configure network parameters in a DHCPv6 address pool.
•
Configure network parameters in a DHCPv6 option group, and reference the option group in a
DHCPv6 address pool.
Network parameters configured in a DHCPv6 address pool take precedence over those configured
in a DHCPv6 option group.

Configuring network parameters in a DHCPv6 address pool

Step
1. Enter system view.
2. Create a DHCPv6 address
pool and enter its view.
3. Specify an IPv6 subnet for
dynamic assignment.
4. (Optional.) Specify a DNS
server address.
5. (Optional.) Specify a domain
name suffix.
6. (Optional.) Specify a SIP
server address or domain
name.
7. (Optional.) Configure a
self-defined DHCPv6 option.
Command
temporary address range
start-ipv6-address
end-ipv6-address
[ preferred-lifetime
preferred-lifetime valid-lifetime
valid-lifetime ]
static-bind address
ipv6-address/addr-prefix-length |
duid duid [ iaid iaid ]
[ preferred-lifetime
preferred-lifetime valid-lifetime
valid-lifetime ]
Command
system-view
ipv6 dhcp pool pool-name
network prefix/prefix-length
[ preferred-lifetime preferred-lifetime
valid-lifetime valid-lifetime ]
dns-server ipv6-address
domain-name domain-name
sip-server { address ipv6-address |
domain-name domain-name }
option code hex hex-string
246
Remarks
By default, no temporary IPv6
address range is specified, and
the DHCPv6 server cannot
assign temporary IPv6
addresses.
By default, no static binding is
configured.
To add more static bindings,
repeat this step.
Remarks
N/A
By default, no DHCPv6
address pool exists on the
DHCPv6 server.
By default, no IPv6 subnet is
specified.
By default, no DNS server
address is specified.
By default, no domain name
suffix is specified.
By default, no SIP server
address or domain name is
specified.
By default, no self-defined
DHCPv6 option is
configured.