address to the server. As a result, packets from a host to a server are forwarded by the gateway, but
packets from a server to a host are not forwarded by the gateway.
Follow these steps to specify the IP addresses of servers:
To do...
Enter system view
Enter VLAN view
Specify the IP addresses of servers
Displaying and maintaining MFF
To do...
Display MFF port configuration
information
Display the MFF configuration
information of a specified VLAN
MFF configuration examples
Auto-mode MFF configuration example in a tree network
Network requirements
As shown in
from the DHCP server. They are isolated at Layer 2, and can communicate with each other through
Gateway. MFF automatic mode is enabled on Switch A and Switch B.
Figure 140 Network diagram
Use the command...
system-view
vlan vlan-id
mac-forced-forwarding server
server-ip&<1-10>
Figure
140, all the devices are in VLAN 100. Host A, Host B, and Host C obtain IP addresses
Use the command...
display mac-forced-forwarding interface [ |
{ begin | exclude | include }
regular-expression ]
display mac-forced-forwarding vlan vlan-id
[ | { begin | exclude | include }
regular-expression ]
365
Remarks
—
—
Required
No server IP address is specified by
default.
Remarks
Available in any view
Available in any view