Voice Vlan Configuration Examples; Automatic Voice Vlan Mode Configuration Example - HP 5120 EI Series Lan Switching Configuration Manual

Task
Display the OUI addresses that the
system supports.

Voice VLAN configuration examples

Automatic voice VLAN mode configuration example

Network requirements
As shown in
The MAC address of IP phone A is 001 1- 1 100-0001. The phone connects to a downstream device
•
named PC A whose MAC address is 0022- 1 100-0002 and to GigabitEthernet 1/0/1 on an
upstream device named Device A.
The MAC address of IP phone B is 001 1-2200-0001. The phone connects to a downstream device
•
named PC B whose MAC address is 0022-2200-0002 and to GigabitEthernet 1/0/2 on Device A.
Device A uses voice VLAN 2 to transmit voice packets for IP phone A and uses voice VLAN 3 to
•
transmit voice packets for IP phone B.
Configure GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 to operate in automatic voice VLAN
•
assignment mode. In addition, if one of them has not received any voice packet in 30 minutes, the
port is removed from the corresponding voice VLAN automatically.
Figure 52 Network diagram
Configuration procedure
# Create VLAN 2 and VLAN 3.
<DeviceA> system-view
[DeviceA] vlan 2 to 3
Please wait... Done.
# Set the voice VLAN aging time to 30 minutes.
[DeviceA] voice vlan aging 30
Figure 52,
Command
display voice vlan oui [ | { begin | exclude |
include } regular-expression ]
158
Remarks
Available in any view