Placing Originals On The Exposure Glass - Toshiba e-studio 900 Operator's Manual

Placing Originals on the Exposure Glass

Reference
When you place originals on the exposure glass, you can specify the way cop-
ies are delivered. See p.139 "Eject Copy Face Up/Down in Glass".
A
Lift the exposure glass cover or ADF.
Important
Do not lift the exposure glass cover or ADF forcefully. Otherwise, ADF
cover might open or be damaged.
Note
Be sure to lift the exposure glass cover or ADF to an angle of more than 30°.
Otherwise, the size of the original might not be correctly detected.
B
Place the original face down on the exposure glass. The original should be
aligned against the rear left corner.
1
2
1.
Positioning mark
2.
Left scale
Note
Start with the first page to be copied.
C
Lower the ADF.
ND1C01EE
Placing Originals
1
13