Set The Copy Quantity; Exposure Adjustment/Photo Copying - Toshiba 120/150 Operator's Manual

SET THE COPY QUANTITY

Set the number of copies using the two copy quantity (
table.
• Press the clear (
• A single copy can be made with the initial setting, i.e., when "1" is displayed.
• Press the
be carried out while you press and hold down the
Also, if the
and the count from 1 to 99 is restarted.
• If the
99 to 1. (A fast countdown will be carried out while you press and hold down the
key.)
• When the

EXPOSURE ADJUSTMENT/PHOTO COPYING

Exposure adjustment
Copy density adjustment is not required for most originals in the automatic exposure mode. To adjust the
copy density manually or to copy photographs, the exposure level can be adjusted in five steps manually.
The copy resolution used for AUTO and MANUAL (
1 Press the exposure mode selector key to select the MANUAL
( ) mode or PHOTO (
2 Use the light (
If exposure level 2 is selected, the two left-handmost indicators for that
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.
3-6
MAKING COPIES
) key to clear an entry if a mistake is made.
key to count up the copy quantity from 1 to 99. (A fast countup will
key is pressed while 99 appears, the copy quantity becomes 0
key is pressed, the copy quantity becomes 0 and is counted down from
key is pressed during copying, the number of copies is displayed.
) mode.
) and dark ( ) keys to adjust the exposure level.
, ) keys when copying from the original
key.)
) mode can be changed. (p. 4-3)