Table of Contents
Advertisement
Enable/Disable Scheduler
Allows the Scheduler to process scheduled events (setpoints).
• Enter this command to control if the Scheduler is allowed to process the
programmed scheduled events (setpoints).
• Enter one digit, 0 for OFF (disabled), 1 for ON (enabled).
Command Form:
Command
Enable/Disable Scheduler
Acknowledgment: Sends OK
Errors:
Error
? err 1
? err 2
Default Condition: Enabled.
Example:
To disable the scheduler, enter the following:
(PW) 63 15 0 *
To enable the scheduler, enter the following:
(PW) 63 15 1 *
Form
Data Digits
(PW) 63 15 x *
0 = OFF (disabled)
1 = ON (enabled)
Meaning
wrong number of digits entered
illegal digit entered
Scheduler
9-7
Advertisement
Table of Contents
