Table of Contents
Advertisement
Causes a Hookflash to occur on the phone line.
• A hookflash (also called a flash) is an indication to a phone system to
perform an action, for example to pick up another call that is waiting or to
conference another party during an outgoing call.
• Enter this command to cause a hookflash.
• This command has no effect when no autopatch or reverse patch has been
made.
Command Form:
Command
Landline Hookflash
Acknowledgment: Sends OK
Errors:
Error
? err 1
? err 2
Default Condition: None
Example:
Cause a hookflash on the phone line during an autopatch:
(PW) 83 1 *
Note: This command will have either no effect or will disconnect your call if
your phone line is not equipped to respond to a hookflash.
Landline Hookflash
Telephone Interface Functions
Form
(PW) 83 1 *
Meaning
wrong number of digits entered
illegal digit entered
7-23
Advertisement
Table of Contents
