Command: Select Autopatch Dialing Mode - S-COM 7K Manual

7K • Chapter 7
Select Autopatch Dialing Mode
Programs the type of autopatch dialing.
• Enter one digit representing the dialing mode from the table below.
Command Form:
Command
Select Autopatch Dialing Mode
Data Digit
1
2
3
Acknowledgment: Sends OK
Errors:
Error
? err 1
? err 2
Default Condition: Autopatch Dialing Mode is 10 PPS rotary
Examples:
To change the dialing mode to 20 pulses per second, enter the following:
(PW) 61 2 *
To change the dialing mode to DTMF (Touch Tone™), enter the following:
(PW) 61 3 *
7-6
Form
(PW) 61 x *
Explanation
10 pulses per second, rotary dialing
20 pulses per second, rotary dialing
DTMF (Touch Tone™) dialing
(5 digits per second)
Meaning
wrong number of digits entered
illegal digit entered
Data Digit
1 = 10 PPS
2 = 20 PPS
3 = DTMF