Table of Contents
Advertisement
7K • Chapter 7
Enable/Disable Autopatch Dialing Mixed-Mode
Controls whether mixed-mode dialing is allowed on the autopatch.
• Mixed-Mode dialing means both rotary and DTMF dialing are allowed.
• The dialer will dial only in the way allowed by the Select Autopatch Dialing
Mode command on page 7-6.
• If mixed-mode dialing is turned OFF (disabled), the controller will ignore any
C and D characters in the phone number. (C means dial in rotary, D means
dial in DTMF.)
• If mixed-mode dialing is turned ON (enabled), the dialer will switch back and
forth between rotary and DTMF dialing, according to C and D characters
found in the telephone number.
• Enter one digit, 0 for OFF (disabled), 1 for ON (enabled).
Command Form:
Command
Enable/Disable Autopatch Dialing Mixed-
Mode
Acknowledgment: Sends OK
Errors:
Error
? err 1
? err 2
Default Condition: Autopatch Dialing Mixed-Mode Is OFF (disabled)
7-10
Form
(PW) 63 04 x *
Meaning
wrong number of digits entered
illegal digit entered
Data Digit
0 = OFF (disabled)
1 = ON (enabled)
Advertisement
Table of Contents
