Table of Contents
Advertisement
Key Transmitter (Timed)
Keys the specified Transmitter (TX1 or TX2) for a timed period.
• The specified transmitter will not key under this command if it has been
disabled using the Enable/Disable Transmitter command on page 17-8.
• Enter transmitter, 1 or 2.
• Enter a 1-, 2-, or 3-digit number representing the amount of time the
transmitter should key (in tenths of minutes).
• Enter nothing (or 000) to cancel key request.
Command Form:
Command
Key Transmitter (Timed)
Acknowledgment: Sends OK
Errors:
Error
? err 1
? err 2
Default Condition: Both Transmitters TX1 and TX2 are not requested to key
Transmitter Functions
Form
(PW) 00 x yyy *
Meaning
wrong number of digits entered
illegal digits entered
Data Digit
x = transmitter =
(1 or 2)
yyy = (001–546) =
(0.1–54.6) minutes
or yyy = [ (nothing) ,
0, 00, 000] = cancel
key
17-9
Advertisement
Table of Contents
