Command: Select (Review) Courtesy Messages - S-COM 7K Manual

Select (Review) Courtesy Messages
Program unique Courtesy Messages for each receiver.
• Enter the password, the 4-digit root number, the desired message, and a
(*).
• Any message may be any combination of message types including CW,
beeps, page tones, speech, etc.
• The maximum size of any message is 50 bytes (50 2-digit codes).
• You must count the control character. Therefore, any message could have
46 CW characters, 23 synthesized speech words, and so on.
• To delete a message, enter the password, the 4-digit root number, and the
(*). Do not enter any message.
Command Form:
Command
Select Courtesy Message for Rx1
Select Courtesy Message for Rx2
Select Courtesy Message for Rx3
Review Courtesy Message for Rx1
Review Courtesy Message for Rx2
Review Courtesy Message for Rx3
Acknowledgment: Sends OK
Errors:
Error
? err 1
? err 2
Default Condition:
Command
Select Courtesy Message for Rx1
Select Courtesy Message for Rx2
Select Courtesy Message for Rx3
Repeater Functions
Form
(PW) 31 10 (message) *
(PW) 31 11 (message) *
(PW) 31 12 (message) *
(PW) 34 10 *
(PW) 34 11 *
(PW) 34 12 *
Meaning
wrong number of digits entered
illegal digit entered
Default Condition
60mS 440 Hz beep (9910 74 09)
60mS 660 Hz beep (9910 74 16)
60mS 880 Hz beep (9910 74 21)
18-9