Table of Contents
Advertisement
Telephone Interface Functions
Note: The controller will examine the command after it has searched the Macro
Name Table. If a macro named "911" is found, it will be executed. If there is no
macro named "911," the autopatch will dial 911 (if enabled).
The controller has no problem with telephone numbers that begin with the
same digits as macros if their lengths are different. In other words, the
controller will properly execute a macro named "6636," and it will properly dial
"663-6000," even though the first four digits are the same.
Remember, commands are not executed until the terminator is received.
Therefore, "6636" and "6636000" are entirely different commands to the
controller.
(By the way, the Macro Name Table exists only in the controller's memory. As
such, it does not appear in print anywhere in this manual.)
7-31
Advertisement
Table of Contents
