Table of Contents
Advertisement
Errors:
Error
? err 1
? err 2
Default Condition:
Command
Select Normal CW Speed
Select Slow CW Speed
Examples:
To change the normal CW sending speed to 17 words per minute, enter:
(PW) 12 5 *
To change the slow CW sending speed to 10 words per minute, enter:
(PW) 13 2 *
Note: There are two ways to change the speed of a CW message. One way is
to use the commands shown above; this is usually done upon installation. The
other method is to insert a speed change character into the message. The
latter is a temporary method, since the speed returns to normal after the
message is sent.
Meaning
wrong number of digits entered
illegal digit entered
Default Condition
20 WPM
15 WPM
Messages
4-15
Advertisement
Table of Contents
