Signal Contact; Manual Setting - Hirschmann rsb20 Reference Manual

Diagnostics

7.6 Signal contact

The signal contacts are used for

controlling external devices by manually setting the signal contacts,
 monitoring the functions of the device,

reporting the device state of the device.
7.6.1

Manual Setting

 Select the "Signal Contact 1" or "Signal Contact 2" card index (for devices
with two signal contacts).
 Select the "Manual Setting" mode in the "Signal Contact Mode" field. This
mode enables you to control this signal contact remotely.
 Select "Open" in the "Manual Setting" field to open the contact.
 Select "Closed" in the "Manual Setting" field to close the contact.
Application options:

Simulation of an error during SPS error monitoring.
 Remote control of a device via SNMP, such as switching on a camera.
114
7.6 Signal contact
RM Web L2B
Release 5.3 05/2012