Table of Contents
Advertisement
ESMT
COMMANDS
Mode register set command
(
,
,
,
CS
RAS
CAS
WE = Low)
The M12L64164A has a mode register that defines how the device operates. In
this command, A0 through A11, BA0 and BA1 are the data input pins. After power on,
the mode register set command must be executed to initialize the device.
The mode register can be set only when all banks are in idle state. During 2CLK
(t
) following this command, the M12L64164A cannot accept any other commands.
RSC
Activate command
( CS , RAS = Low, CAS , WE = High)
The M12L64164A has four banks, each with 4,096 rows.
This command activates the bank selected by BA1 and BA0 (BS) and a row
address selected by A0 through A11.
This command corresponds to a conventional DRAM's RAS falling.
Precharge command
( CS , RAS , WE = Low, CAS = High )
This command begins precharge operation of the bank selected by BA1 and BA0
(BS). When A10 is High, all banks are precharged, regardless of BA1 and BA0.
When A10 is Low, only the bank selected by BA1 and BA0 is precharged.
After this command, the M12L64164A can't accept the activate command to the
precharging bank during t
RP
This command corresponds to a conventional DRAM's RAS rising.
Elite Semiconductor Memory Technology Inc.
(precharge to activate command period).
M12L64164A
Publication Date: May 2008
Revision: 3.3
15/46
Advertisement
Table of Contents
