Table of Contents
Advertisement
ABSOLUTE MAXIMUM RATINGS
Stresses above the values so mentioned above may cause permanent damage to the device. These
values are for a stress rating only and do not imply that the device should be operated at conditions up
to or above these values. Exposure of the device to the maximum rating values for extended periods of
time may adversely affect the device reliability.
Storage Temperature
Plastic Packages
Output Short Circuit Current
Input and Output Voltage
(with respect to ground)
Notes:
1.
No more than one output shorted at a time. Duration of the short circuit should not be greater than one second.
2.
Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, inputs may undershoot V
up to 50ns and to –2.0 V for periods of up to 20ns. See figure below. Maximum DC voltage on output and I/O pins is V
During voltage transitions, outputs may overshoot to V
RECOMMENDED OPERATING RANGES
Ambient Operating Temperature
Operating Supply Voltage
Notes:
1. Recommended Operating Ranges define those limits between which the functionality of the device is guaranteed.
Maximum Negative Overshoot Waveform
This Data Sheet may be revised by subsequent versions
or modifications due to changes in technical specifications.
Parameter
1
2
Vcc
Parameter
Industrial Devices
Vcc
Rev. F, Issue Date: 2009/03/16
Value
-65 to +150
-65 to +125
200
-0.5 to +4.0
-0.5 to +4.0
+ 1.5 V for periods up to 20ns. See figure below.
cc
1
Value
-40 to 85
Full: 2.7 to 3.6
Vcc
+1.5V
Maximum Positive Overshoot Waveform
27
©2004 Eon Silicon Solution, Inc.,
EN25F16
Unit
°C
°C
mA
V
V
to –1.0V for periods of
ss
+ 0.5 V.
cc
Unit
°C
V
www.eonssi.com
Advertisement
Table of Contents
