Rear Panel
Antenna
WAN
LAN
Reset Button
Power Port
Figure 3: Rear Panel
One 2 dbi antenna.
Connect the DSL or Cable Modem here. If your modem came
with a cable, use the supplied cable. Otherwise, use a standard
LAN cable.
Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.
This button has two (2) functions:
Reboot. When pressed and released, the Wireless Router
will reboot (restart).
Clear All Data. This button can also be used to clear ALL
data and restore ALL settings to the factory default values.
Note: If pressed and held for 5 seconds, twice in a row, the
router will enter debug mode. Please power off, then on to
restart the unit.
Connect the supplied power adapter here.
10
Introduction