Chapter 2
Installation
This Chapter covers the physical installation of the Wireless Router.
Requirements
Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45
connectors.
TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either of a DSL
or Cable modem (for WAN port usage)
To use the Wireless Access Point, all Wireless devices must be compliant with the
IEEE802.11b or IEEE802.11g specifications.
Procedure
1. Choose an Installation Site
Select a suitable place on the network to install the Wireless Router.
Ensure the Wireless Router and the DSL/Cable modem are powered OFF.
Figure 4: Installation Diagram
11
2