Chapter 4 Pc Configuration; Overview; Windows Clients - LevelOne wbr-3408 User Manual

Chapter 4
PC Configuration
This Chapter details the PC Configuration required on the local ("Inter-
nal") LAN.

Overview

For each PC, the following may need to be configured:

TCP/IP network settings

Internet Access configuration

Wireless configuration

Windows Clients

This section describes how to configure Windows clients for Internet access via the
Wireless Router.
The first step is to check the PC's TCP/IP settings.
The Wireless Router uses the TCP/IP network protocol for all functions, so it is essen-
tial that the TCP/IP protocol be installed and configured on each PC.
TCP/IP Settings - Overview
If using the default Wireless Router settings, and the default Windows
TCP/IP settings, no changes need to be made.

By default, the Wireless Router will act as a DHCP Server, automatically providing
a suitable IP Address (and related information) to each PC when the PC boots.

For all non-Server versions of Windows, the default TCP/IP setting is to act as a
DHCP client.
If using a Fixed (specified) IP address, the following changes are re-
quired:

The Gateway must be set to the IP address of the Wireless Router

The DNS should be set to the address provided by your ISP.
If your LAN has a Router, the LAN Administrator must re-
configure the Router itself. Refer to Chapter 8 - Advanced
Setup for details.
30
4