Wireless Station Configuration - LevelOne wbr-3408 User Manual

Wireless Station Configuration

This section applies to all Wireless stations wishing to use the Wireless Router's
Access Point, regardless of the operating system which is used on the client.
To use the Wireless Access Point in the Wireless Router, each Wireless station must
have compatible settings, as follows:
Mode
SSID (ESSID)
Wireless
Security
Note:
By default, the Wireless Router will allow both 802.11b and 802.11g connections.
The mode must be set to Infrastructure.
This must match the value used on the Wireless Router. The
default value is WBR-3408
Note! The SSID is case sensitive.
By default, Wireless security on the Wireless Router is disabled.

If Wireless security remains disabled on the Wireless Router,
all stations must have wireless security disabled.

If Wireless security is enabled on the Wireless Router, each
station must use the same settings as the Wireless Router.
43
PC Configuration