Setup Wizard - LevelOne wbr-3408 User Manual

Setup Wizard

The first time you connect to the Wireless Router, the Setup Wizard will run automati-
cally. (The Setup Wizard will also run if the Wireless Router's default settings are
restored.)
1. Step through the Wizard until finished.

You need to know the type of Internet connection service used by your ISP.
Check the data supplied by your ISP.

The common connection types are explained in the tables below.
2. On the final screen of the Wizard, run the test and check that an Internet connec-
tion can be established.
3. If the connection test fails:

Check your data, the Cable/DSL modem, and all connections.

Check that you have entered all data correctly.

If using a Cable modem, your ISP may have recorded the MAC (physical) ad-
dress of your PC. Run the Wizard, and on the Cable Modem screen, use the
"Clone MAC address" button to copy the MAC address from your PC to the
Wireless Router.
Common Connection Types
Cable Modems
Type
Dynamic
IP Address
Static (Fixed)
IP Address
DSL Modems
Type
Dynamic
IP Address
Static (Fixed)
IP Address
PPPoE
Details
Your IP Address is allo-
cated automatically, when
you connect to you ISP.
Your ISP allocates a per-
manent IP Address to you.
Details
Your IP Address is allo-
cated automatically, when
you connect to you ISP.
Your ISP allocates a per-
manent IP Address to you.
You connect to the ISP only
when required. The IP
address is usually allocated
automatically.
16
ISP Data required
Usually, none.
However, some ISP's may
require you to use a particu-
lar Hostname, Domain name,
or MAC (physical) address.
IP Address allocated to you.
Some ISP's may also require
you to use a particular Host-
name, Domain name, or
MAC (physical) address.
ISP Data required
None.
IP Address allocated to you.
User name and password.
Setup