Connection Details - Singtel Ras - LevelOne wbr-3408 User Manual

Buttons
Connect
Disconnect
Clear Log
Refresh

Connection Details - SingTel RAS

If using the SingTel RAS access method, a screen like the following example will be
displayed when the "Connection Details" button is clicked.
Data - RAS Screen
Internet
RAS Plan
Physical Ad-
dress
IP Address
Network Mask
Default Gateway
DNS IP Address
If not connected, establish a connection to Telstra Big Pond.
If connected to Telstra Big Pond, terminate the connection.
Delete all data currently in the Log. This will make it easier to
read new messages.
Update the data on screen.
Figure 32: Connection Details - RAS
The RAS plan (connection speed) currently used.
The hardware address of this device, as seen by remote devic-
es on the Internet. (This is different to the hardware address
seen by devices on the local LAN.)
The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
The Network Mask associated with the IP Address above.
The IP Address of the remote Gateway or Router associated
with the IP Address above.
The IP Address of the Domain Name Server which is currently
used.
53
Operation and Status