Table of Contents
Advertisement
LED
Power
100M
LNK/ACT
FDX/COL
Rear Panel
The 3-pronged power plug, default button, and 16 or 24 RJ-45 Ethernet ports
are located at the rear Panel of the 16/24 10/100Base-TX Web Smart Switch.
The Switch will work with AC in the range 100-240V AC, 50-60Hz.
RJ-45 Ports (Auto MDI/MDIX): 16 or 24x 10/100 N-way auto-sensing for
10Base-T or 100Base-TX connections.
[In general, MDI means connecting to another Hub or Switch while MDIX
means connecting to a workstation or PC. Therefore, Auto MDI/MDIX means
that you can connect to another Switch or workstation without changing
non-crossover or crossover cabling. ]
Status
Description
Green
Power On
Off
Power is not connected
Green
In 100Mbps connection speed
In 10Mbps connection speed or no device
Off
connect
Green
The port is connecting with the device.
Blinks
The port is receiving or transmitting data.
Off
No device attached.
Green
The port is operating in Full-duplex mode.
Blinks
Collision of Packets occurs in the port.
Off
In half-duplex mode
Table 2-1. The Description of LED Indicators
6
Advertisement
Table of Contents
