LevelOne wbr-3408 User Manual page 51

Data - L2TP Screen
Internet
Physical Ad-
dress
IP Address
Connection
Status
Connection Log
Connection Log
Buttons
Connect
Disconnect
Clear Log
Refresh
The hardware address of this device, as seen by remote devic-
es on the Internet. (This is different to the hardware address
seen by devices on the local LAN.)
The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
This indicates whether or not the connection is currently estab-
lished.

If the connection does not exist, the Connect button can be
used to establish a connection.

If the connection currently exists, the Disconnect button
can be used to break the connection.

Normally, it is not necessary to use the Connect and Dis-
connect buttons unless the setting "Connect automatically,
as required" is disabled.

The Connection Log shows status messages relating to the
existing connection.

The "Clear Log" button will restart the Log, while the Re-
fresh button will update the messages shown on screen.
If not connected, establish a connection to your ISP.
If connected to your ISP, hang up the connection.
Delete all data currently in the Log. This will make it easier to
read new messages.
Update the data on screen.
51
Operation and Status