LevelOne wbr-3408 User Manual page 26

Wireless Distribution System Setup (WDS)
Click WDS Setup on the Wireless screen to view a screen like the following.
Figure 10: Wireless Distribution System Setup Screen
Data - WDS Setup Screen
Enable WDS
Allow Device
Forbid Wire-
less stations
Wireless Distribution System is used to inter-connect Wireless Access Points or Rou-
ters so that the network can be shared between them.
You can enter the network MAC addresses of each of the Wireless Access Points or
Routers so that the WDS will only include the specified devices.
Tick to Enable WDS.
Enter the MAC Addresses of the Access Points or Routers you
wish to inter-connect.
Tick this if you want this Wireless Router to act only as a WDS
Access Point and not allow clients (notebooks of PCs) to connect
to it.
26
Setup