LevelOne wbr-3408 User Manual page 46

LAN
IP Address
Network Mask
DHCP Server
Wireless
Network Name
(SSID)
802.11 Mode
Channel
Security
System
Device Name
Firmware Version
Buttons
Connection Details
System Data
Restart
Refresh Screen
The IP Address of the Wireless Router.
The Network Mask (Subnet Mask) for the IP Address
above.
This shows the status of the DHCP Server function - either
"Enabled" or "Disabled".
For additional information about the PCs on your LAN, and
the IP addresses allocated to them, use the PC Database
option on the Administration menu.
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
The current 802.11 mode is displayed here.
This shows the Channel currently used, as set on the Wire-
less screen.
This indicates the Wireless security system currently used.
This displays the current name of the Wireless Router.
The current version of the firmware installed in the Wireless
Router.
View the details of the current Internet connection. The sub-
screen displayed will depend on the connection method
used. See the following sections for details of each sub-
screen.
Display all system information in a sub-window.
Clicking this button will restart (reboot) the Wireless Router.
All existing connections though the Wireless Router will be
terminated, but will usually re-connect automatically.
Update the data displayed on screen.
46
Operation and Status