LevelOne wbr-3408 User Manual page 66

Multi-DMZ
This feature, if enabled, allows the DMZ computer or computers on your LAN to be
exposed to all users on the Internet.

This allows almost any application to be used on the "DMZ PC".

The "DMZ PC" will receive all "Unknown" connections and data.

If the DMZ feature is enabled, you must select the PC to be used as the "DMZ
PC".
To use this feature:

Enter an IP address allocated to you by your ISP into the WAN IP address field.

Select the PC to be the DMZ PC for traffic sent to this IP address.

Enable this DMZ.
If you have multiple Internet IP addresses, you can assign one DMZ PC for each
Internet IP address.
If you only have 1 WAN IP address, only "DMZ 1" can be used, and only one (1) PC
can be the DMZ PC. The current WAN IP address is displayed. If this address is
assigned upon connection, and no connection currently exists, then this address will
be blank or 0.0.0.0.
Figure 39: Multi-DMZ Screen
The "DMZ PC" is effectively outside the Firewall, mak-
ing it more vulnerable to attacks. For this reason, you
should only enable the DMZ feature when required.
66
Advanced Features