Access Control Log - LevelOne wbr-3408 User Manual

Data - Services Screen
Available Services
Available Ser-
vices
"Delete" button
Add New Service
Name
Type
Start Port
Finish Port
ICMP Type

Access Control Log

To check the operation of the Access Control feature, an Access Control Log is pro-
vided. Click the View Log button on the Access Control screen to view this log.
This log shows attempted Internet accesses which have been blocked by the Access
Control function.
Data shown in this log is as follows:
Date/Time
Name
Source IP address
MAC address
Destination
This lists all the available services.
Use this to delete the selected Service from the list.
Enter a descriptive name to identify this service.
Select the correct type for this Service.
If the "Type" (above) is TCP, UDP, or TCP/UDP, enter the port
number for this Service. If a port range is required, enter the
beginning of the range here, and the end of the range in the
"Finish Port" field.
If the "Type" (above) is TCP, UDP, or TCP/UDP, this field can
be used to enter the end of range of port numbers. This can be
left blank if not required.
If the "Type" (above) is ICMP, enter the ICMP type here. Oth-
erwise, this field should be left blank.
Date and Time of the attempted access.
If known, the name of the PC whose access was blocked.
The IP Address of the PC or device whose access request
was blocked
The hardware or physical address of the PC or device whose
access request was blocked
The destination URL or IP address
60
Advanced Features