LevelOne wbr-3408 User Manual page 54

DHCP Client
Buttons
Release/Renew
Refresh

This will show "Enabled" or "Disabled".

If "Enabled", the Internet IP Address from your ISP is
allocated automatically upon connection. (Dynamic IP Ad-
dress). In this case the "Lease obtained" and "Remaining
lease time" fields provide additional information. Note that
the lease is automatically renewed on expiry; use the "Re-
new" button if you wish to manually renew the lease
immediately.

If "Disabled", the Internet IP Address from your ISP is
Fixed or Static. In this case, the "Release/Renew" button is
not operational.
This button is only useful if the IP address shown above is
allocated automatically on connection. (Dynamic IP address).
Otherwise, it has no effect.

This button will say "Release" if the Wireless Router is
currently using an IP Address allocated by the ISP's DHCP
Server. Clicking the "Release" button will release the IP
Address and break the connection.

If the button says "Renew", this indicates that the ISP's
DHCP Server has not allocated an IP Address for the Wire-
less Router. Clicking the "Renew" button will re-establish
the connection and obtain an IP Address from the ISP's
DHCP Server.
Update the data shown on screen.
54
Operation and Status