Table of Contents
Advertisement
Introduction
Rear Panel
Reset Button
This button will reset the Wireless ADSL Router to the factory
default settings.
(Reset to
To do this, press and hold the Reset Button for five (5)
Defaults)
seconds, until the Status LED is lit, then release the Reset
Button, and wait the Wireless ADSL Router to restart using the
factory default values.
Power port
Connect the supplied power adapter here.
Power switch
Press IN for power ON, OUT for power OFF.
Use standard LAN cables (RJ45 connectors) to connect your
10/100BaseT
PCs to these ports.
LAN
connections
Note:
Any LAN port on the Wireless ADSL Router will automatically
function as an "Uplink" port when required. Just connect any
port to a normal port on the other hub, using a standard LAN
cable.
WAN port
Connect this port to your ADSL line.
(ADSL port)
Figure 3: Rear Panel
7
Advertisement
Table of Contents
