Wireless Security Screen - LevelOne wbr-3408 User Manual

Wireless Security Screen

This screen is accessed by clicking the "Configure" button on the Wireless screen.
There are 3 options for Wireless security:

Disabled - no data encryption is used.

WEP - data is encrypted using the WEP standard.

WPA/WPA2-PSK - data is encrypted using the WPA standard. This is a later
standard than WEP, and provides much better security than WEP.
Wireless Security - WEP
Data - WEP Screen
Authentication
Key Size
Passphrase
Key
Figure 8: WEP Screen
Normally this can be left at the default value of "Auto". If that
fails, select the appropriate value - "Open System" or "Shared
Key." Check your wireless card's documentation to see what
method to use.
Select the WEP Encryption level:

64-bit (sometimes called 40-bit) encryption

128-bit encryption
Enter a word or group of printable characters in the Passphrase
box and click the "Generate " button to automatically configure
the WEP Key(s). If encryption strength is set to 64 bit, then each
of the four key fields will be populated with key values. If encryp-
tion strength is set to 128 bit, then only the selected WEP key
field will be given a key value.

Use the radio buttons to select the default key.

Enter the key value you wish to use. Other stations must
have the same key values.

Keys must be entered in Hex. Hex characters are the digits
(0 ~ 9) and the letters A ~ F.
24
Setup